當齒輪連續轉動時，當兩嚙合點在節點兩側對稱位置時，閉合體積逐漸減小。引進潤滑泵的葉片泵。為了讓您更好的了解我們的產品，并向您講解齒輪油泵的保養方法：潤滑頻繁，電動油桶泵高速運轉，潤滑脂易揮發，所以必須保持軸承處的潤滑清潔，并注意更換。利用泵控技術制作環件，可以提高數據的應用率，簡化制造工藝，節省數據和加工時間，如目前普遍采用耐磨泵管制作的泵管、管件等。從結構上看，它像一個單向閥，所以也可以參考單向閥的維修方法。                       

軟管泵工作原理：
一根內壁光滑，強度可靠的特制橡膠軟管安裝在泵體內部，通過一對壓輥沿著軟管旋轉擠壓，這樣的 旋轉使得介質往一個方向輸送而不會倒流，軟管在輸送介質之后，由被壓扁軟管的自身彈性和側導輪的強制下，軟管恢復原狀，此時，軟管內產生高真空將介質再次吸入管腔，然后介質在隨之而來的壓輥擠壓下從軟管內排出，如此周而復始，介質不斷的被吸入和排出。目前產品使用溫度為≤100℃。根據用戶需要可以開發使用溫度在120℃的軟管泵軟管產品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.